For illustrative purpose only
Cimco 18 1372 cable tie Polyamide White 100 pc(s)
Cimco 18 1372, Polyamide, White, V2, 1 head(s), ISO EN 62275 IEC 92-101 UL 94-V2 ISO 1210 MIL-S-23190 E CE, 240 mm
Read more...
Read more...
Product Information
| Information | |
|---|---|
| Manufacturer | Cimco |
| Product code | 166565932 |
| EAN | 04021103813720 |
| Manufacturer part number | 181372 |
Product Description
Raw material:
Pure polyamide 6.6 (PA 6.6, nylon) with no recycling material content, raw materials procured solely from leading quality manufacturers, colours: natural or black (RAL 9011) by enrichment with carbon (carbon black).
Material properties:
Self-extinguishing according to UL 94-V2, melting point +260 °C, halogen-free, silicon-free, non-toxic, food-safe according to Recommendation “X” (10) BGA (German Health Authority), non-conductive, high abrasion resistance, low frictional resistance, impact-resistant, recyclable. Black cable ties retain the moisture in the plastic, thus preventing embrittlement, hardening and fragility. Black cable ties are thus suitable for outdoor application and weatherproof for at least two years.
Chemical resistance:
Resistant to (among others) oils, petroleum products (e.g. petrol, kerosine, fats and lubricants), hydrocarbons (e.g. lower alcohols, acetone), cleaning agents and solvents, alkalis, mould, salt water. Conditionally resistant among others, to strongly diluted acids. Non-resistant to, amongst others, phenols, oxidising chemicals, formic acid, phosphoric acid, chlorine, chloric acid (e.g. hydrochloric acid, butanoic acid), benzoic acid, mineral acids.
Processing conditions and conditions of use:
Installation temperature (during installation) -10 °C to +80 °C, continuous service temperature (following installation) -40 °C to +105 °C, possible changes in length depending on temperature (between -20 °C and +100 °C) maximum +/- 1.5 %, depending on relative air humidity (between 25 % and 100 %) maximum +/- 3 %, no changes in length due to ageing if cable ties are not under load.
Important when storing cable ties:
Before use, store cable ties in the sealed packaging, to prevent drying out in a cool, not exceedingly dry place, away from sources of heat. Naturally coloured cable ties can turn yellow after an extended period of time due to temperature-dependent oxidation. This will not affect performance properties.
Packaging:
Packaged in synthetic transparent foil, 100 % recyclable, vacuum sealed.
Authorisations and Certifications of Quality:
Products comply with ISO EN 62275, the IEC Standard IEC 92-101, flame retardant according to UL 94-V2, “Yellow Card” certification from Underwriters Laboratories Inc., self-extinguishing in accordance with UL 94, flame class 94V-2, self-extinguishing in accordance with ISO 1210, flame class FV-2, minimum retention strength in accordance with MIL-S-23190 E standard.
Pure polyamide 6.6 (PA 6.6, nylon) with no recycling material content, raw materials procured solely from leading quality manufacturers, colours: natural or black (RAL 9011) by enrichment with carbon (carbon black).
Material properties:
Self-extinguishing according to UL 94-V2, melting point +260 °C, halogen-free, silicon-free, non-toxic, food-safe according to Recommendation “X” (10) BGA (German Health Authority), non-conductive, high abrasion resistance, low frictional resistance, impact-resistant, recyclable. Black cable ties retain the moisture in the plastic, thus preventing embrittlement, hardening and fragility. Black cable ties are thus suitable for outdoor application and weatherproof for at least two years.
Chemical resistance:
Resistant to (among others) oils, petroleum products (e.g. petrol, kerosine, fats and lubricants), hydrocarbons (e.g. lower alcohols, acetone), cleaning agents and solvents, alkalis, mould, salt water. Conditionally resistant among others, to strongly diluted acids. Non-resistant to, amongst others, phenols, oxidising chemicals, formic acid, phosphoric acid, chlorine, chloric acid (e.g. hydrochloric acid, butanoic acid), benzoic acid, mineral acids.
Processing conditions and conditions of use:
Installation temperature (during installation) -10 °C to +80 °C, continuous service temperature (following installation) -40 °C to +105 °C, possible changes in length depending on temperature (between -20 °C and +100 °C) maximum +/- 1.5 %, depending on relative air humidity (between 25 % and 100 %) maximum +/- 3 %, no changes in length due to ageing if cable ties are not under load.
Important when storing cable ties:
Before use, store cable ties in the sealed packaging, to prevent drying out in a cool, not exceedingly dry place, away from sources of heat. Naturally coloured cable ties can turn yellow after an extended period of time due to temperature-dependent oxidation. This will not affect performance properties.
Packaging:
Packaged in synthetic transparent foil, 100 % recyclable, vacuum sealed.
Authorisations and Certifications of Quality:
Products comply with ISO EN 62275, the IEC Standard IEC 92-101, flame retardant according to UL 94-V2, “Yellow Card” certification from Underwriters Laboratories Inc., self-extinguishing in accordance with UL 94, flame class 94V-2, self-extinguishing in accordance with ISO 1210, flame class FV-2, minimum retention strength in accordance with MIL-S-23190 E standard.