For illustrative purpose only
D3 SSDSC2KB480GZ01 internal solid state drive 2.5" 480 GB Serial ATA III TLC 3D NAND
D3 SSDSC2KB480GZ01, 480 GB, 2.5", 550 MB/s, 6 Gbit/s
Read more...
Read more...
Product Information
| Information | |
|---|---|
| Manufacturer | Intel |
| Product code | 229482659 |
| EAN | 00675901848688 |
| Manufacturer part number | SSDSC2KB480GZ01 |
| Category | SSD kõvakettad |
| Features | |
|---|---|
| SSD form factor | 2.5" |
| Memory type | TLC 3D NAND |
| NVMe | N |
| Hardware encryption | Y |
| Data transfer rate | 6 Gbit/s |
| Read speed | 550 MB/s |
| Write speed | 460 MB/s |
| Random read (4KB) | 79000 IOPS |
| Random write (4KB) | 30000 IOPS |
| Random read (100% span) | 79000 IOPS |
| Random write (100% span) | 30000 IOPS |
| Random latency - read (up to) | 102 µs |
| Random latency - write (up to) | 48 µs |
| Sequential latency - read (up to) | 36 µs |
| Sequential latency - write (up to) | 36 µs |
| End-to-End Data Protection | Y |
| Enhanced Power Loss Data Protection technology | Y |
| SSD temperature monitoring | Y |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^17 bits read |
| Harmonized System (HS) code | 84717070 |
| Storage | |
|---|---|
| SSD capacity | 480 GB |
| Ports & interfaces | |
|---|---|
| Interface | Serial ATA III |
| Design | |
|---|---|
| Component for | Server/workstation |
| Network | |
|---|---|
| Security algorithms | 256-bit AES |
| Performance | |
|---|---|
| Mean time between failures (MTBF) | 2000000 h |
| Export Control Classification Number (ECCN) | 5A992C |
| Commodity Classification Automated Tracking System (CCATS) | G162706 |
| Power | |
|---|---|
| Power consumption (read) | 3 W |
| Power consumption (write) | 3 W |
| Power consumption (idle) | 1.2 W |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Maximum operating temperature | 70 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 3.13 G |
| Operating shock | 1000 G |
| Non-operating shock | 1000 G |
| Memory | |
|---|---|
| Internal memory type | SATA 3.0 6Gb/S |
| Processor | |
|---|---|
| Processor family | Intel SSD D3 |
| Other features | |
|---|---|
| Power consumption (active) | 3 W |
| Launch date | Q3'21 |
| SSD endurance rating | 2.5 PBW |
| SSD shock | 1000G,0.5ms |
| Sequential reading | 550 MB/s |
| Sequential writing speed | 460 MB/s |
| Status | Launched |
Product Description
Enhanced Power Loss Data Protection
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption
Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption
Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.