Todellinen tuote voi poiketa kuvasta
Neumann Monitor Alignment Kit 1, consisting of KH 750 DSP Subwoofer & MA 1 Measuring Microphone
Tuotetiedot
| Yleistä tietoa | |
|---|---|
| Valmistaja | Neumann |
| Tuotekoodi | 477354770 |
| Valmistajan koodi | NEU509134 |
| Kategoria | Mikrofonit |
Tuotekuvaus
Neumann Monitor Alignment Kit 1
Great monitoring starts here. The Neumann MA 1 monitor alignment kit with KH 750 DSP subwoofer adds depth and detail to your existing monitor setup. With a custom-calibrated measurement microphone, tuned subwoofer and easy-to-use software, it's like having an experienced engineer right in the room.
Mix, master and monitor with precision. The Neumann KH 750 DSP active subwoofer is designed for exceptional acoustic performance. It is compact and powerful with a 10" long-throw woofer on board. Together with the Neumann.Control app, you can get the best sound out of the palm of your hand.
Best possible sound for home studios and professional control rooms. The MA 1 Monitor Alignment software automatically calibrates your stereo monitors. Advanced calibration algorithms make it easy to achieve top-notch results wherever you mix, master and monitor.
Features
- Active 10" subwoofer
- Perfect for complementing smaller monitors
- Very clean and neutral bass response without exaggeration
- Versatile bass management
- Analogue and digital stereo inputs
- Calibrate your monitors and correct your room with the measuring microphone
- Precise bass response from a DSP-controlled closed cabinet subwoofer
- Controlled with intuitive software on Mac or PC
Technical Data
Neumann MA 1 monitor orientation
- Acoustic operating principle: pressure transducer
- Directional pattern: Omnidirectional
- Frequency range: 20Hz - 20kHz
- Sensitivity at 1kHz in 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software)
- Nominal impedance: 50 Ohm
- Nominal load impedance: 1000 Ohm
- Equivalent noise level, CCIR: 39dB
- Equivalent noise level, A-weighted: 27 Db-A
- Maximum SPL for THD 0.5 : 132dB
- Signal-to-noise ratio, CCIR (with respect to 94 dB SPL): 55dB
- Signal-to-noise ratio, A-weighted (with respect to 94 dB SPL): 67 dB
- Maximum output voltage: 10dBu
- Supply voltage (P48, IEC 61938): 48V +/- 4V
- Current consumption (P48, IEC 61938): 3 mA
- Suitable connector: XLR3F
- Weight: 37g
- Diameter: 23 mm
- Length: 117 mm
Neumann KH 750 DSP Active Studio Subwoofer
- Free field frequency range ±6 dB: 16 - 800 Hz
- Free field frequency range ±3 dB: 18 - 750 Hz
- Sine wave output with a distortion factor of 95 dB SPL (>70 Hz)
- Bass capability: Max. Sound pressure level in half-space at 3 THD at 1 m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL
- Self-generated noise at 10 cm (with input gain of 100 dB SPL for 0 dBu):
- Control design: Digital; active
- Crossover frequency: 80 Hz fixed or 60 - 100 Hz via Neumann control
- Transition slope: 24 dB/oct; 4th order
- Equalisation (low-cut): 30 Hz; 0 - -12 dB
- Phase: 0; 45; 90; 135 and 0/180 degrees
- Equalisation (via Neumann.Control software): 8 x fully parametric IIR + global balance between low and high shelves
- FIR phase correction: For connected analogue speakers: linear phase (170 Hz - 16 kHz; +/- 45°)
- Latency: 1.5 ms (A-D-A); 1.2 ms (D-A)
- Delay (user-adjustable delay range): 0 - 100 ms and 2 x 0 - 20.8 ms
- Output power woofer amplifier (THD+N with limiter deactivated 10 ): 256 W
- Volume control range; resolution (via Neumann.control): 0 - -∞ dB; 0.1 dB
- Signal routing modes: right; external bass management; 2 x LFE
- Input gain control (sensitivity): +2 - -12 dB
- Output level control (output level at 1 m based on 0 dBu input level): 94; 100; 108; 114 dB SPL
- Analogue inputs: 2 x XLR: analogue electronically balanced
- Analogue outputs: 2 x XLR; analogue electronically balanced
- Analogue input impedance: >13 kΩ
- Max. Input level: CMRR: >56 dB at 15 kHz
- Crosstalk (1 kHz), level adjustment:
- Analogue dynamic range; THD+N: 119 dB(A);
- Digital inputs: BNC (75 Ω): AES3; S/P-DIF
- Digital outputs: BNC (75 Ω): AES3
- Mains power supply (input voltage; frequency): 100 - 240 V ; 50/60 Hz
- Power consumption (standby / idle / full power):
- Standby: Disabled; 90 min (default); user-defined in software.
- Driver, magnetically shielded (woofer): 265 mm (10")
- Cabinet finish, colour (custom): Painted metallic anthracite (RAL 7021)
- Baffle cover: Supplied metal grille
- Dimensions(WxDxH): 383x330x383mm
- Weight: 19,5kg
Scope of Delivery
- 1 x MA 1 Microphone
- 1 x Neumann KH 750 DSP active studio subwoofer
- 1 x microphone clamp
- 1 x quick reference guide
- 1 x safety guide
- Software is downloadable