For illustrative purpose only
D-Link DPE-301GS PoE adapter Fast Ethernet, Gigabit Ethernet
D-Link DPE-301GS, Fast Ethernet, Gigabit Ethernet, 10,100,1000 Mbit/s, IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u, White, CE, FCC, VCCI, RCM, 32.4 W
Read more...
Read more...
Product Information
| Information | |
|---|---|
| Manufacturer | D-Link |
| Product code | 07177961 |
| EAN | 00790069416675 |
| Manufacturer part number | DPE-301GS |
| Category | PoE |
| Network | |
|---|---|
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Power over Ethernet (PoE) | |
|---|---|
| Power over Ethernet (PoE) | Y |
| Other features | |
|---|---|
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u |
| Dimensions (WxDxH) | 109.8 x 62.2 x 24.5 mm |
| Design | |
|---|---|
| Rack mounting | N |
| Product colour | White |
| Features | |
|---|---|
| Certification | CE, FCC, VCCI, RCM |
| Output power | 32.4 W |
| Ports & interfaces | |
|---|---|
| Ethernet LAN (RJ-45) ports | 2 |
| DC-in jack | Y |
| Power | |
|---|---|
| AC adapter input voltage | 100 - 240 V |
| AC adapter frequency | 50/60 Hz |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | 0 - 50 °C |
| Operating temperature (T-T) | 32 - 122 °F |
| Operating relative humidity (H-H) | 5 - 95% |
| Storage temperature (T-T) | -30 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95% |
| Weight & dimensions | |
|---|---|
| Weight | 98 g |
| Package weight | 230 g |
| Packaging data | |
|---|---|
| Package width | 106 mm |
| Package depth | 156 mm |
| Package height | 61 mm |
| Number of products included | 1 pc(s) |
| Logistics data | |
|---|---|
| Shipping (inner) case length | 44.5 cm |
| Shipping (inner) case width | 33.2 cm |
| Shipping (inner) case height | 32.5 cm |
| Shipping (inner) case net weight | 9.2 kg |
| Products per shipping (inner) case | 40 pc(s) |
| Pallet gross weight (air) | 327.8 kg |
| Master (outer) cases per pallet (air) | 30 pc(s) |
| Products per pallet (air) | 1200 pc(s) |
| Pallet gross length | 120 cm |
| Pallet gross width | 110 cm |
| Pallet height (air) | 176.5 cm |
| Pallet gross weight (sea) | 327.8 kg |
| Master (outer) cases per pallet (sea) | 30 pc(s) |
| Products per pallet (sea) | 1200 pc(s) |
| Pallet height (sea) | 176.5 cm |
| Shipping (inner) case gross weight | 10.3 kg |
Product Description
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.
The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.
The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.