For illustrative purpose only
DPA ST4006A Microphone Stereo Set, black, const. of 2x 4006A Microphone / 2x windscreen / Peli Case holder
Product Information
| Information | |
|---|---|
| Manufacturer | DPA Microphones |
| Product code | 477342510 |
| Manufacturer part number | DPAST4006A |
| Category | Microphones |
Product Description
DPA ST4006A Microphone Stereo Set
The extensive and diverse d:dicate™ microphone series is legendary in the recording and film production industry. The microphones in this series deliver clear, accurate sound and are widely used by professionals who know something about sound and demand only the best.
Even though the standard tolerances of the d:dicate™ microphones are extremely tight, they are even tighter in a stereo match. The tolerances of these specially selected d:dicate™ 4006A microphones are within ±0.5 dB for both frequency response and sensitivity. The pair is shipped in a Heavy Duty Peli™ Case, for safe transport and easy access to microphones and accessories.
The d:dicate™ 4006A omnidirectional microphone is a flexible solution. Sound engineers, producers and musicians appreciate its clear, natural and precise sound reproduction. It is the ideal microphone for AB stereo recordings of symphonic concerts. It is also ideal for direct miking of all types of instruments and as a microphone for outdoor interviews.
Features
- Modularity - interchangeable capsules and preamplifier
- Dynamic range up to 120 dB
- Suppression of high frequency interference > 60 and > 40 dB
- Linear frequency response
- High SPL
- Excellent gain before feedback
Technical Data
- Directional pattern: Omnidirectional
- Principle of operation: Pressure
- Cartridge type: Pre-polarized condenser
- Frequency response: 10 Hz - 20 kHz
- Effective frequency range ±2 dB: 10 Hz - 20 kHz
- Sensitivity, nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent noise level, ITU-R BS.468-4T: yp. 27 dB (max. 29 dB)
- Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
- Dynamic range: Typ. 124 dB
- Max. SPL, THD 10%: 146 dB SPL peak
- Switchable attenuator, filters etc.: 0 dB / -20 dB
- Rated output impedance: 200 Ω
- Minimum load impedance: 2 kΩ
- Cable drive capability: 100 m
- Output balance principle: Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR): > 60 dB
- Power supply (for full performance): P48 (Phantom Power)
- Current consumption: 2.8 mA
- Maximum output voltage, RMS: 8.0 V
- Polarity: +V at pin 2 for positive sound pressure
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Temperature range: -40°C to 45°C
- Relative humidity (RH): Up to 90 %
- Color: Matte black
- Microphone diameter: 16 - 19 mm
- Capsule diameter: 16 mm
- Microphone length: 170 mm
- Weight: 163 g
Scope of Delivery
- 2x 4006A microphone
- 2x windscreen
- 2x microphone clip
- 1x Peli Hardcase