Tootepildid on illustratiivsed
Augusaag Bahco kõvasulamhammastega 20mm
Bahco 3832-20-C, 2 cm, 45 g
Loe rohkem...
Loe rohkem...
| Vali | Tarnija | Saadavus | Hind | Eeldatav tarne |
|---|---|---|---|---|
| TM | 0 | 16.23 € | ~ R 18.04 |
Valitud tarnija toote eeldatav tarneaeg: ~ R 18.04
16.23 €
tk
Tagastusõigus
14 päeva raha tagasi garantiiPaindlikud maksevõimalused
- Eraisikutele, ettevõtetele ja riigiasutustele arve või e-arvega tasumise võimalus
- Pangalingi kaudu tasumine - Coop, LHV, SEB, Swedbank, Luminor, Citadele
- Krediitkaardiga tasumine
Maksa hiljem või osamaksetena
Järelmaksu kalkulaator
-
MTS Järelmaks
100 € - 10 000 € -
Liisi Järelmaks
10 € - 25 000 € -
Inbank järelmaks
100 € - 10 000 € -
LHV Järelmaks
50 € - 15 000 €
Kuumakse:
0.50 €
Tulemus on ligikaudne ning sõltub individuaalsest maksevõimekusest.
Toote andmed
Toote kirjeldus
• Carbide tipped holesaws specially designed for stainless steel and other tough materials
• Optimised heat treatment for long life and strong body support for the carbide teeth
• Carbide is harder than bi-metal and suitable to use in more application areas
• A versatile holesaw for cutting stainless steel, cast iron, wood with nails, tiles, plaster boards, fibreglass, and other abrasive materials
• If you don´t have optimised cutting conditions, the carbide holesaws will be tougher than bi-metal even in steel
• Cutting depth max. 38 mm (1-1/2")
• 4 teeth per inch
• Knockout holes allow easy removal of cores
• Max. hole size = nominal holesaw size +1.5 mm / -0.0
• Carbide tips ground to final shape with 6° positive cutting angle
• Holesaws with standard attachment to fit a wide range of arbours
• Engineered to improve productivity and craftsmanship, from the design of the cutting edges to the technologies used to produce the holesaws
• Optimised heat treatment for long life and strong body support for the carbide teeth
• Carbide is harder than bi-metal and suitable to use in more application areas
• A versatile holesaw for cutting stainless steel, cast iron, wood with nails, tiles, plaster boards, fibreglass, and other abrasive materials
• If you don´t have optimised cutting conditions, the carbide holesaws will be tougher than bi-metal even in steel
• Cutting depth max. 38 mm (1-1/2")
• 4 teeth per inch
• Knockout holes allow easy removal of cores
• Max. hole size = nominal holesaw size +1.5 mm / -0.0
• Carbide tips ground to final shape with 6° positive cutting angle
• Holesaws with standard attachment to fit a wide range of arbours
• Engineered to improve productivity and craftsmanship, from the design of the cutting edges to the technologies used to produce the holesaws