Tootepildid on illustratiivsed
Ecler HUB1616 Zone Mixer, 16 Zones, 19'', 2U, IN: Cinch/RJ45/Phoenix/RS-232, Mute Switch, App Control
Toote andmed
| Üldandmed | |
|---|---|
| Tootja | ECLER |
| Tootekood | 477342689 |
| Tootja kood | ECLCHUB1616 |
| Kategooria | Räkimikserid |
Toote kirjeldus
Ecler HUB1616 Zone Mixer
The Ecler HUB1616 is a zone manager with a wide range of inputs and outputs, a further development of the predecessor model eMIMO1616. Configuration is done via the embedded web server application HANGAR (control via standard web browser on Windows / Mac OS etc.). Remote control is possible via physical control panels for wall mounting, call stations (paging) and applications for mobile devices (Android, iOS). In addition, the HUB1616 has DSP with specific functions for the inputs and outputs.
The HUB series devices offer a wide range of possibilities, are intuitive to use and easy to configure. Anyone, from the inexperienced user to the true professional, can use them to get a professional audio installation up and running (plug & play) in just a few minutes. The perfect solution for any type of sound reinforcement where different zones need to be operated and controlled separately.
Features
- 16 inputs, 16 outputs digital zoner with integrated DSP
- Easy programming and control by embedded web application, HANGAR, and standard web browser
- Control from the front panel and user remote control
- Control available, by zone (output): selection of audio source (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
- Four priority levels, ducker/pager functions
- Available DSP: frequency shifter, link stereo, delay, crossover filters, 8-band graphic EQ, compressor/limiter and much more
- Predefined setups for a quick installation (plug and play)
- MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect
Technical Data
Digital
- CPU: Floating point 32/64 bit
- Sampling rate: 48 kHz
- Latency: < 1,5 ms
- Resolution: 24 bit, AKM
- Dynamic range: AD: 111 dB / DA: 115 dB
Line Inputs (1, 2 ,3, 4)
- Sensitivity: +5 / -15dBV External potentiometer adjust
- Impedance: >13k
- Input headroom: 12dBV
- Connector: RCA female. Input 1 and 2 with Euroblock stack
- Type: Unbalanced
Mic/Line Inputs (5, 6, 7, 8)
- Sensitivity: +0 / -50dBV External potentiometer adjustment
- Impedance: >24k electronically balanced
- Input headroom: 12dBV
- Connector: Euroblock (Symmetrical)
- Type: Balanced
- Pagers: Input 7 and 8 (by RJ45 connector)
- Phantom: +48VDC (rear panel switch)
- CMRR: >60dB (20Hz - 20kHz)
Remote Inputs (9 - 16)
- Sensitivity: 0 dBV without adjustment
- Impedance: >24k electronically balanced
- Input headroom: 12dBV
- Connector: RJ45 Connector
- Type: Balanced
- CMRR: >60dB (20Hz - 20kHz)
Line Outputs (1 - 16)
- Max output level: 12dBV
- Connector: Euroblock 3-pin
- Type: Balanced
Headphone Output
- Power: >200mW – 200Ω
- Connector: Mini-Jack 3,5mm
General
- External mute: Normally open. Assignable to any output zone
- Frequency response: <10Hz ~ 20kHz (+0dB / -0.5dB)
- Output noise floor (FFT): >110dB (from 20Hz to 20kHz)
- THD + Noise: < 0.005% (1kHz, 1Vrms)
- Crosstalk: >90dB, 20Hz - 20kHz
- Processing: Level, Noise Gate, EQ, Compressor, Delay, Crossover, Volume, Ducker, Pager
- Management connectivity: Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
- Remote bus: RS485
- Programming and control: Hangar (embedded web application), Ecler pilot (Andorid/iOSapplicaction), TPNET (UDP/RS232)
- Aux power supply for remotes: +12VDC, 0,6A max. (short circuit protected)
- Power supply: 90-240 VAC, 50-60Hz
- Power consumption: 20 W
- Dimensions (WxDxH): 483 x 210 x 88 mm
- Weight: 3,66 kg